News & Events

Engineering Conclave- 2024

Engineering conclave-2024 was held on 13-07-2024 to review the syllabus of 4th year 2021 curriculum and 3rd year, 2022 curriculum. The curriculum was presented to the industry expert Dr. Anand M Shivapuji, Senior Research scientist, Center for Sustainable technologies & Founder Director, Carbsorb Solutions Private Limited,Indian Institute of Science, Bangalore. Discussions were made on the curriculum and Suggestions were recorded to be suitably included in the curriculum.

Meeting with Top Executives of LKQ on Curriculum and Internship

LKQ is a fortune 300 company, a wholly-owned subsidiary of Keystone Automotive Operations Inc., an LKQ company. LKQ is a global leading provider of alternative and specialty parts to repair and accessorize automobiles and other vehicles.

Project Open Day 2024

The project open day – 2024 was conducted on 11th May 2024 at 10:00 am. The event was presided and reviewed by Mr. Vanishree Nagaraj. Head R&D, Passive safety and Sensorics. Continental. All the 14 project batches of Automobile Engineering presented their projects. Every batch was given 10 minutes of time for presentation and 10 minutes for queries and response.

FDP on "Innostrive"

Faculty Development program on “INNOSTRIVE - Empowering Faculty to be Innovative Entrepreneurs”- 2024 Funded by NISP, DSCE" from 26th Feb - 1st March 2024

Life skills program titled “From Impossible to Possible”

"Life skills program titled “From Impossible to Possible” was conducted on 18.01.2024 by Sushma Lingarag, Counsellor & Life Coach, DSCE. The program was conducted to guide students to set goals and work towards the set goals with consistency and passion.

Viksit Bharat

Report on the Viksit Bharat@2047 Web Telecast held at the Department of Automobile Engineering in DSCE. The event took place on 11/12/2023, and it was organized by Ministry of Education, Govt of India.

Social Responsibility

Department of Automobile Engineering, DSCE takes pride in giving back to society and participates in activities for the betterment of the society. Department gave School children of Tibetan school, bylakuppe an overview of Automotive Engineering and Electric Vehicle Technology on 08.09.2023 Students.

Engineering Conclave 2023

Engineering conclave-2023 was held on 24-06-23 in Automobile Engineering Department. The curriculum was presented to the industry expert Mr. Suhas B R, Technical lead, Vehicle crash Safety, Tata Technologies for his inputs. Also few student representatives were present to give feedback on the curriculum. Suggestions were recorded and suitably included in the curriculum. Few innovative Methods of teaching design and thermal subjects were suggested by the expert which would be implemented in TLP.

Project Open Day – 2023

The project open day – 2023 was conducted on 10th June 2023 at 10:00 am. The event was presided and reviewed by Mr. Ajay Krishna Sayee. Manager, Projects- Electric Vehicles, Honda Motor Cycles and Scooters Pvt. Ltd. All the 16 project batches of Automobile Engineering presented their projects.

MSME Vendor Cart

Rs 8 lakhs fund approved under Incubation Component of MSME Innovative Scheme( Incubation, Design & IPR) of MSME Champion Scheme for GoI assistance.

"ದಯಾನಂದ ಸಾಗರ್ ಕಾಲೇಜ್ ಆಫ್ ಇಂಜಿನಿಯರಿಂಗ್ ಪದವಿ ಪ್ರಶಸ್ತಿ ಪ್ರದಾನ ಸಮಾರಂಭ"

Soot Pollution Control Device Inauguration

The Department of Automobile Engineering has developed soot pollution control device to trap the airborne particulate matter under Social Responsibility activities to reduce air pollution.Mr. Rohan PremSagar, Member Governing Council DSCE, Joint Secretary DSIinaugurated Soot pollution control device on 10th Feb 2022. This event was presided bySri Galiswamy, Secretary, DSI. Dr.CPS Prakash, Principal DSCE, was present during the inauguration.

Engineering Conclave 2021

Engineering conclave was held on 07-08-21 in Automobile Engineering Department through online mode. The industry expert Mr. SatishThimmalapura, Deputy General Manager, Project House Electrification, BOSCH Ltd., suggested inputs related to electric vehicles, vehicle dynamics, battery technology etc. The session was interactive and latest developments in Automotive Sector was highlighted by industry expert to improve the curriculum.

Photos of Engineering Conclave 2021 held on 07-08-21

Conclave Poster

Welcome Address by Dr. Naveena B E, Associate Prof., Dept of Automobile Engineering

Message by Dr. C P S Prakash, Principal, DSCE

Discussion during the presentation on Scheme and Syllabus of Automobile Engineering

Young Achiever Award – Male (ISIEINDIA)

Dr Vijay tambrallimath has been chosen for the award of "Young Achiever Award (Male)" to be conferred by Imperial Society of Innovative Engineers, India (ISIEINDIA). The award has been considered with respect to academics, research and age.

Chairperson of international conference

Dr Jenoris Muthiya was the Chairperson of the International conference on Material Research in Science and Engineering (MRSE 2021) , organized by Kumaraguru college of Technology during 23-25 July 2021.

Project Open Day – 2021(Virtual)16th July, 2021 at 11.00 AM

The Virtual project open day – 2021 was conducted on 16th July 2021 (Friday) at 11:00 am. The event was presided and reviewed by Ashok Kumar V A, who presently working as Director in RV-Automotive Electronics Design Centre, Bengaluru. All the 16 project batches of Automobile Engineering presented their projects. The projects reviewed were graded under 3 categories, namely. Best project, Best project Social relevance and Best Project Innovation.

Invitation

Glimpse of the project review

Welcome Address by HOD

Principals message to students

Introduction of the guest

Design and Fabrication of Chassis

Design and Implementation of solar charging

Design and Fabrication of Suspension system

Winners under each categories

• Best Project – Overall: B13: Design and Fabrication of Chassis
• Best Project – Innovation: B11: Design and Fabrication of Suspension system
• Best Project – Social Relevance: B10: Design and Implementation of solar charging

Conclusion note by the guest

Vote of thanks by HOD

Winners announcement

The Project open day 2021 was coordinated by Project Coordinators : Dr.Nandakumar M B and Dr. Naveen B E

Online FDP

Dr Vijay T, Assistant Professor, Automobile Engineering, DSCE was resource person in AICTE sponsored ATAL FDP program held virtually at IRTT, Erode, TN. The following sessions were presented: 1. Fused Deposition Modeling: Materials and Scope on 23.6.21 2. Case study on PC-ABS based graphene filled polymer nanocomposite synthesized by FDM process on 24.6.21

FDP

Dr. S Jenoris Muthiya has successfully completed an 5 day International faculty Development Programme 7/6/21 to 11/6/21 from on “Challenges in Energy management for Smart Cities” ,organized by Dept. of EEE in association with Centre of Renewable Energy Technology - AVIT.

Inaugurated Two Wheeler Service Activities in the Department

The Department has taken an initiative to utilizing laboratory infrastructure and man power effectively during this pandemic period by starting two wheeler service activities. Through this activity we could generate fund as well as provide affordable service price to DSCE staff.

ENGINEERING CONCLAVE 2020

Engineering Conclave was held on 16th June 2020 at 10 AM in the Department Seminar Hall. The Industry expert Mr. Anandakumar, Sr. General manager, Technical Service Support, BOSCH was kind enough to be the resource person and offered his valuable suggestions on Self Driving Vehicles, Electric and Hybrid Vehicles and IOT in Manufacturing etc.

Webinar by BOSCH

A Webinar on “Exhaust Gas Treatment for On-Road Vehicles” was organized bythe department 9th of June 2020. Mr.SreejithPrakash from BOSCH delivered the lecture.

Parent Teachers Meet

Conducted parent teachers meeting and discussed about online teaching and other academic activities on 30/5/2020.

Webinar by ALTAIR Solutions

Altair and Design Tech Solutions presented a webinar at 10.30 am on 7/5/2020 for the students of Automobile Engineering. Discussion was focused on development of commercial vehicles through modelling and various processes that undergoes in final development of the product. Simulation was also briefed in the webinar.

Webinar by Decibels, Bangalore

Department hosted webinar on "Career Opportunity for Automotive Engineers in Electric Vehicle Sector" conducted by Decibels, Bangalore on 16.5.2020.

“Two Days Smart Manufacturing on Artificial Intelligence in Additive Manufacturing for Automobile Sector”

2 days workshop on Artificial Intelligence in Additive Manufacturing for Automotive Sector was conducted in the Department of Automobile Engineering on 5th and 6th of March 2020. Resource persons from Global 3D Labs and Kashyapa Labs conducted the program and students were exposed to concepts of AI and AM. The response of the students towards the program was well appreciated.

Project Presentation in the event “Avishkar” at VTU, Belgaum

Our 6th semester students Ashik S V and Srushti D N presented their pollution control device at Avishkar Project Presentation at VTU, Belgaum on 11-03-2020.

Autodesk Fusion 360 Academy Seminar and Exhibition

Students of VIII semester participated in Autodesk Fusion 360 Academy Seminar and Exhibition on 22-02-2020 at Radisson Blu, Bengaluru.

Interaction with Scientech Technologies Pvt. Ltd.

A meeting with Nikhil Kela, Sr. Executive, from Scientech Technologies Pvt. Ltd. was held in the Department Seminar Hall. The objective of the interaction was to explore the possibilities to have an MOU for carrying out joint research programmers and also setting up a Lab on Electric and Autonomous Vehicles.

Interaction with CADD Centre

HOD and Faculty member of the department interacted with Mr. Vidyashankar, Business Head, CADD Centre on 17-01-2020 regarding training program on Electric Vehicle for students.