PUBLICATIONS
| LIST OF PAPER PUBLICATIONS BY FACULTIES CAY M1 (2025-26) | |||
| Sl. No. | Faculty name | Journal/Book chapter | Details |
| 1 | Dr.Balamurugan | Journal | S. Madhankumar, Geetha Narayanan Kannaiyan, T. Vignesh, S. Balamurugan, Akhilesh Kumar Singh, Vinod G. Surange, Drying kinetics modelling of bitter gourd in a phase change material-integrated indirect solar dryer, Solar Energy, Volume 314, 2026, 114729. (Q1, IF: 7.9, WoS and Scopus Indexed). |
| 2 | Nandakumar M.B | Journal | N.G. Siddeshkumar, H.M. Manjula, K. Balakrishnan, T.C. Pramod, B. Latha Shankar, Arshan Ali Khan, H.M. Pruthvi, Santosh Pawan K, M.B. Nandakumar, Subramanya R. Prabhu, C. Durga Prasad, Study on dry sliding wear behavior and machine learning models for wear rate prediction of nano hybrid 2219 MMCs reinforced with n-B4C & MoS2, Results in Surfaces and Interfaces, Volume 20, 2025, 100623. (Q1, IF: 6.2, WoS and Scopus Indexed). |
| 3 | Nandakumar M B | Journal | Harish, U., Mruthunjaya, M., Chakule, R.R. Nandakumar M B et al. ”Effect of cobalt variation on microstructural and erosion performance of HVOF-sprayed WC–Co-Cr-Ni hard-faced coatings”. Journal of Materials Science: Materials in Engineering, 20, 73 (2025) (Q2, IF 4.2, WOS and Scopus Indexed ) |
| 4 | Nandakumar M B | Journal | Mary Vasanthi , Nandakumar Mandya Basavaraj , Jani S.P and, Sujin Jose Arul, Sustainable enhancement of mechanical and wear properties in natural fiber composites: integration of bio-waste fillers and taguchi optimization for bio medical applications, Global NEST Journal (Volume 27, Issue 3, available online December 19, 2024) (Q3, IF 1, Scopus) |
| 5 | Dr Mahesh B R | Journal | Performance and Emission Evaluation of a Turbocharged Two-Stroke SI Engine. BE Naveena, P Manoj Kumar, S Yogesh Kumar, M Shashank, M Yathindra, Solomon Jenoris Muthiya, MB Nandakumar, BR Mahesh , International Journal of Vehicle Structures & Systems (IJVSS) , 2025/8/1 |
| 6 | Dr Mahesh B R | Journal | Performance Comparison of Tree-Based and Neural Network Models for Wear Prediction in Coated and Uncoated Al6061 , BE Naveena, K Santhosh, R Keshavamurthy, TV Shrivathsa, BB Ganesha, BR Mahesh, Results in Surfaces and Interfaces , 2026/3/21 |
| 7 | Dr. Puneet N P | Journal | Acharya, S., Puneet, N. P., Desai, R. M., Sundaram, V., & Kumar, H. (2025). Synthesis, characterization and selection of optimal constituents of magnetorheological fluid for damper application. Indian Journal of Engineering and Materials Sciences (IJEMS), 32(01), 56-69. https://doi.org/10.56042/ijems.v32i01.11672 (SCIE and SCOPUS indexed, IF-0.9, Q3) |
| 8 | Dr. Puneet N P | Journal | Puneet, N. P., Devikiran, P., Kumar, H., & Gangadharan, K. V. (2025). Performance evaluation of magneto-rheological damper with spring accumulator and on-road testing by implementing in a four wheeler vehicle. Sādhanā, 50(4), 255. https://doi.org/10.1007/s12046-025-02893-w (SCIE and SCOPUS indexed, IF-1.4, Q2) |
| 9. | Dr. Puneet N P | Conference Proceeding | Verma, A.K., Barnwal, N., Puneet, N.P., Kumar, H., Sahu, R.K., Jena, D. (2026). Development and Characterization of an Internal Variable Orifice Damper for Vehicular Application. In: Debnath, K., Saha, U.K., Rao, P.N. (eds) Recent Innovations and Developments in Mechanical Engineering. ICRIDME 2024. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-95-9318-7_28 (SCOPUS indexed, Q4) |
| 10 | Dr. Naveena B E | Journal | K. Santhosh, B.E. Naveena, H.M. Shankara Murthy, Jayashish Kumar Pandey, B.M. Praveenkumara, H.S. Arun Kumar, G.S. Divya, “Synthesis and evaluation of third-generation Azolla pinnata methyl ester for combustion and emission characteristics of a direct injection CI engine with isopropanol as an additive”, Energy Reports, Volume 15, 2026, 109335, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2026.109335. (SCIE and SCOPUS indexed, IF-6.6, Q1) |
| 11 | Dr. Naveena B E | Journal | B.E. Naveena, K. Santhosh, R. Keshavamurthy, T.V. Shrivathsa, B.B. Ganesha, Sahil, B.R. Mahesh, “Performance comparison of tree-based and neural network models for wear prediction in coated and uncoated Al6061”, Results in Surfaces and Interfaces, Volume 23, 2026, 100788, ISSN 2666-8459, https://doi.org/10.1016/j.rsurfi.2026.100788. (SCIE and SCOPUS indexed, IF-6.2, Q1) |
| 12 | Dr. Naveena B E | Journal | Arun Kumar K. N., Ganesha B. B., Naveena B E. et al. Integrated cryogenic, statistical and ANN approach for performance optimization of Al6061/SiC/Gr hybrid composites. Discov Appl Sci (2026). https://doi.org/10.1007/s42452-026-08382-x (SCIE and SCOPUS indexed, IF-3.8, Q2) |
| 13 | Dr. Naveena B E | Journal | K. Santhosh, Jayashish Kumar Pandey, B.E. Naveena, H.M. Shankara Murthy, B.M. Praveenkumara, R. Thirumaleswara Naik, N.R. Banapurmath, Solomon Jenoris Muthiya, “Impact of injection timing and EGR on the combustion characteristics and emission behavior of DI diesel engines fueled with renewable alcohol based oxygenated blends”, Applied Thermal Engineering, Volume 290, Part 1, 2026, 130023, ISSN 1359-4311, https://doi.org/10.1016/j.applthermaleng.2026.130023. (SCIE and SCOPUS indexed, IF-7.5, Q1) |
| 14 | Dr. Naveena B E | Journal | R Keshavamurthy, BE Naveena, PN Vikram Gowda, TV Shrivathsa, “Performance Evaluation of Friction Stir Spot Welding of Al 5754 and Al 6111 using Machine Learning Approaches”, J. of Materi Eng and Perform (2025). https://doi.org/10.1007/s11665-025-11766-6. (SCIE and SCOPUS indexed, IF-2.6, Q2) |
| 15 | Dr. Naveena B E | Journal | B.E. Naveena, P.M. Kumar, S.Y. Kumar, M. Shashank, M. Yathindra, S.J. Muthiya, M.B. Nandakumar and B.R. Mahesh. 2025. “Performance and Emission Evaluation of a Turbocharged Two-Stroke SI Engine”, Int. J. Vehicle Structures & Systems, 17(5), 852-856. doi:10.4273/ijvss.17.5.19. (SCOPUS indexed, IF-0.19, Q4) |
| 16 | Dr.S.Jenoris Muthiya | Journal | Subramanian, Mohankumar, Laxana Sourirajan, Beena Stanislaus Arputharaj, Jenoris Muthiya Solomon, Pradesh Sakthivel, Subhav Singh, Deekshant Varshney, Ramya Maranan, and Vijayanandh Raja. "Thermo-fluid and structural optimization of hybrid air-assisted CPCM battery thermal management for electric vehicles." Results in Engineering (2026): 110024. (SCIE and SCOPUS indexed, IF-9.4, Q1) |
| 17 | Dr.S.Jenoris Muthiya | Journal | Dineshkumar, Chandran, Solomon Jenoris Muthiya, Tiruvannamalai Rajendran Tamilarasan, Mohankumar Subramanian, Babu Musthafa, Naveena Bettahalli Eswaregowda, Mahesh Belijagali Ramaswamy, and Kavya Jammanahalli Thimmappa. "Crashworthiness enhancement of mild steel and aluminium crash boxes: Influence of Notch geometry through experimental and numerical evaluation." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2026): 09544070261454044.(SCIE and SCOPUS indexed, IF-1.7, Q2) |
| 18 | Dr.S.Jenoris Muthiya | Journal | Vasu, Vikram Kedambadi, G. S. Divya, Solomon Jenoris Muthiya, H. V. Moulya, Anand A. Kakhandaki, and M. V. Kumar. "Impact of Graphene, Printing Speed, and Temperature on the Physio-Mechanical Properties of FFF-Printed ABS Composites: A Statistical Analysis." Journal of Materials Engineering and Performance (2026): 1-22.(SCIE and SCOPUS indexed, IF-2.7, Q2) |
| 19 | Dr.S.Jenoris Muthiya | Journal | Dineshkumar, C., A. S. Selvakumar, Sriram, T. R. Tamilarasan, Solomon Jenoris Muthiya, and Isaac JoshuaRamesh Lalvani J. "Advanced material investigation for enhancing two-wheeler suspension performance using ANSYS optimization." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 240, no. 7 (2026): 4577-4589.(SCIE and SCOPUS indexed, IF-1.7, Q2) |
| 20 | Dr.S.Jenoris Muthiya | Journal | Prathik Jain, S., A. Sundaramahalingam, C. M. Vigneswaran, A. Jenoris Muthiya, and T. Malavika Srinivas. "Performance analysis of nature-inspired honeycomb architectures for aerospace structures." International Journal of Computational Materials Science and Engineering (2026): 2650006..(SCOPUS indexed, IF-1.1, Q3) |
| 21 | Dr.S.Jenoris Muthiya | Journal | Padmanabhan, S., T. Vinod Kumar, J. Senthilkumar, K. M. Kumar, N. Murugu Nachippan, and Solomon Jenoris Muthiya. "Study of Influential Process Parameters in Abrasive Water Jet Machining of Aluminium 6061-T6 Alloys." International Journal of Vehicle Structures & Systems (IJVSS) 18, no. 1 (2026).(SCIE and SCOPUS indexed, IF-1.2, Q4) |
| 22 | Dr.S.Jenoris Muthiya | Journal | Subramanian, Mohankumar, Senthilkumar Pachamuthu, Jenoris Muthiya Solomon, Beena Stanislaus Arputharaj, Pradesh Sakthivel, Arunkumar Karuppasamy, Subhav Singh, Deekshant Varshney, and Vijayanandh Raja. "Experimental Studies on Electrostatic Removal of Particulate Matter Emission from Diesel Engine using Active Reduction Technique." Results in Engineering (2025): 105990..(SCIE and SCOPUS indexed, IF-9.4, Q1) |
| LIST OF PAPER PUBLICATIONS BY FACULTIES CAY M1 (2024-25) | |||
| Sl. No. | Faculty name | Journal/Book chapter | Details |
| 1 | Kavya J T | Journal | JT Kavya, R Keshavamurthy, MK Ravishankar, “Comparative Analysis of Prediction Models for Surface Roughness of Abrasive Water Jet Machined Aluminum In Situ Composites”,Journal of Advanced Manufacturing Systems 24 (04), 985-1010, 8/4/2025 |
| 2 | Nandakumar M.B | Journal | Haiter Lenin, Sujin JoseArul, Nandakumar Mandya Basavaraj & Jani S.P, ”Influence of bio fillers on the characteristics of Luffa acutangula fiber reinforced polymer composites and parametric optimization using Taguchi technique”, scientific reports, Volume 14, Article 30730, December 2024 ( Q1, IF 3.8, scopus ) |
| 3 | Dr Mahesh B R | Journal | Comparative analysis of static and vibration characteristics of glass fiber reinforced epoxy mono composite leaf spring and conventional steel leaf spring ,Divya GS, Jenoris Muthiya Solomon, Mahesh BR, Isaac Joshua Ramesh Lalvani J Journal of Low Frequency Noise, Vibration and Active Control 2024/12 |
| 4 | Dr Mahesh B R | Journal | Plasma-sprayed barium titanate cathode coatings for hydrogen evolution in electrolysis , Naveena BE, Solomon Jenoris Muthiya, Divya GS, P Sudhakar, Mahesh BR, Manjunath N , Ionics 2025/1 |
| 5. | Dr. Puneet N P | Journal | Puneet N P, Radhe Shyam Tak Saini & Hemantha Kumar, (2024). Design and fabrication of cost effective semi-active vehicular suspension system and testing on full scale quarter car suspension rig. Smart Structures and Systems, 34(2), 87-96. https://doi.org/10.12989/sss.2024.34.2.087 (SCIE and SCOPUS indexed, IF-3.342, Q2) |
| 6. | Dr. Puneet N P | Journal | Shrivathsa, T. V., Puneet, N. P., & BG, Vijayasimha Reddy. (2025). Interpretation study of quasi-static uni-axial compression analysis of cellular panels with machine learning application. Advances in materials Research, 14(4), 309-326. https://doi.org/10.12989/amr.2025.14.4.309 (ESCI and SCOPUS indexed, Q2) |
| 7 | Dr. Naveena B E | Journal | Naveena BE, Solomon Jenoris Muthiya, Divya GS, P Sudhakar, Mahesh BR and Manjunath N, “Plasma-sprayed barium titanate cathode coatings for hydrogen evolution in electrolysis”, Ionics 31, 611–622 (2025). https://doi.org/10.1007/s11581-024-05907-5. (SCIE and SCOPUS indexed, IF-3.4, Q2) |
| 8 | Dr. Naveena B E | Journal | B.T. Manjunath, Pratham Naik, B.E. Naveena, Solomon Jenoris Muthiya, J. Godwin John and V. Hariram, “Evaluating the Machinability Characteristics of Aluminium Metal Matrix Composites for Automotive Applications”, Int. J. Vehicle Structures & Systems, 16(6), 850-856 2024. DOI: https://doi.org/10.4273/ijvss.16.6.07. (SCOPUS indexed, IF-0.19, Q4) |
| 9 | Dr. Naveena B E | Journal | Vikram P N Gowda, Keshavamurthy R, Naveena B. E, Solomon Jenoris Muthiya, Joshuva Arockia Dhanraj, Johannex Fefeh Rushman and Amit Verma, “Enhancing Friction Stir Spot Welding of Al 5754 and Al 6111 Joints Using Taguchi’s Technique”, Wiley, Journal of Engineering, Volume 2024, Article ID 7213167, 10 pages. https://doi.org/10.1155/2024/7213167. (SCOPUS indexed, IF-2.6, Q2) |
| 10 | Dr. Naveena B E | Conference | P Sudhakar, Solomon Jenoris Muthiya, BE Naveena, M Rudresh, S Sudhagara Rajan, Mohankumar Subramaniam, C Dineshkumar, R Soundarajan, “A Brief Review on Cogeneration of Energy and Water with Integration of Solar Photovoltaics to Single-Basin Solar Stills”, In: Sakthivel, P., Ramalinga Viswanathan, M., Ravichandran, K. (eds) Proceedings of the 1st International Conference on Recent Advancements in Materials Science and Technology, Volume II. ICRAMST 2024. Springer Proceedings in Physics, vol 415. Springer, Cham. https://doi.org/10.1007/978-3-031-69966-5_29. |
| 11 | Dr.S.Jenoris Muthiya | Journal | Naresh, G., T. Praveenkumar, Dinesh Kumar Madheswaran, Edwin Geo Varuvel, Arivalagan Pugazhendhi, Mohanraj Thangamuthu, and S. Jenoris Muthiya. "Battery fault diagnosis methods for electric vehicle Lithium-ion batteries: correlating codes and battery management system." Process Safety and Environmental Protection (2025): 106919. .(SCIE and SCOPUS indexed, IF-7.2, Q1) |
| 12 | Dr.S.Jenoris Muthiya | Journal | Sabarish, R., S. Jenoris Muthiya, B. Anandan, D. Sathis Kumar, B. Manideep, Prabhakar Sekar, and P. V. Elumalai. "The Role and Impact of Al2O3 Additive on the Performance of the Diesel Engine Operated by JFO Along With Its Measures of Combustion and Emissions." Energy Science & Engineering (2025).(Q1) (Impact Factor 3.3). (SCIE and SCOPUS indexed, IF-3.3, Q1) |
| 13 | Dr.S.Jenoris Muthiya | Journal | Mohankumar Subramanian, Jenoris Muthiya Solomon, Vijayanandh Raja, Beena Stanislaus Arputharaj, Saboor Shaik, C Ahamed Saleel, Mamdooh Alwetaishi, Erdem Cuce, Experimental studies and comprehensive computational investigations on composites-based phase change material for battery thermal management systems in electric vehicles, Journal of Energy Storage,Volume 82,2024. .(SCIE and SCOPUS indexed, IF-9.4, Q1) |
| 14 | Dr Divya G S | Journal | Divya G S, Naveena B E, Suresha B, "Adhesive wear characteristics of mono and hybrid CF/Ep composite with nano-HAP filler", Journal of Metals, Materials and Minerals, 34 (3). 2024. (IF - 0.3, Q3) |
| 15 | Dr Divya G S | Journal | Divya G S, Solomon JM, BR M, Ramesh Lalvani J IJ. Comparative analysis of static and vibration characteristics of glass fiber reinforced epoxy mono composite leaf spring and conventional steel leaf spring. Journal of Low Frequency Noise, Vibration and Active Control. 2024;0(0). (IF - 2.3, Q2) |
| LIST OF PAPER PUBLICATIONS BY FACULTIES CAY M1 (2023-24) | |||
| Sl. No. | Faculty name | Journal/Book chapter | Details |
| 1 | Kavya J T | Journal | JT Kavya, R Keshavamurthy, MK Ravishankar, GS Pradeep Kumar, “Machining Characteristics Evaluation of Al7075–TiB2 In Situ Composite Using Abrasive Water Jet Machining with Varied Test Parameters”, Journal of The Institution of Engineers (India): Series D 106 (1), 145-155 (9/12/2023) |
| 2 | Nandakumar M.B | Journal | Design and Development of Engine Control Unit Bench Simulation Tool Using Hardware in Loop" was co-authored by M.B. Nandakumar, B. Magesh, S.J. Muthiya, K.P. Prashanth, B.R. Mahesh, B.E. Naveena, S. Raja, and J.J. Godwin and published by SAE International on February 23, 2024. (Q4, IF 1, Scopus ) |
| 3 | Dr Mahesh B R | Journal | Numerical Modelling and Simulation of Anti-lock Braking System for Two-wheeler Electric bike using Scilab Xcos Solomon Jenoris Muthiya, V Sudeep, BR Rohit, KP Aakash, Gowda BS Venkatesh, BE Naveena, MB Nandakumar, BR Mahesh , 2024/2/23 ,International Conference on Trends in Automotive Parts Systems and Applications |
| 4 | Dr Mahesh B R | Journal | Design and Development of Engine Control Unit Bench Simulation Tool Using Hardware in Loop" was co-authored by M.B. Nandakumar, B. Magesh, S.J. Muthiya, K.P. Prashanth, B.R. Mahesh, B.E. Naveena, S. Raja, and J.J. Godwin and published by SAE International on February 23, 2024. (Q4, IF 1, Scopus ) |
| 5 | Dr. Naveena B E | Journal | B.E Naveena, R. Keshavamurthy, Solomon Jenoris Muthiya, Joshuva Arockia Dhanraj, Chattariya Sirisamphanwong, Sittiporn Channumsin, Manun Channumsi, Shahariar Chowdhury, Effect of plasma sprayed flyash based composite coatings on corrosion resistance, Heliyon, Volume 9, Issue 4, 2023, e15552, ISSN 2405-8440, https://doi.org/10.1016/j.heliyon.2023.e15552. (SCIE and SCOPUS indexed, IF-2.6, Q1) |
| 6 | Dr. Naveena B E | Journal | Divya G S, Naveena B E, Suresha B, “Adhesive wear characteristics of mono and hybrid CF/Ep composite with nano-HAP filler”, Journal of Metals, Materials and Minerals, vol. 34, no. 3, p. 2040, Jun. 2024. DOI: https://doi.org/10.55713/jmmm.v34i3.2040. (SCOPUS indexed, IF-3, Q2) |
| 7 | Dr.S.Jenoris Muthiya | Journal | Sambandam, Padmanabhan, Deepak James Raj, Vinod Kumar Thangaraj, Solomon Jenoris Muthiya, Mohankumar Subramanian, Senthilkumar Pachamuthu, and T. Praveen Kumar. "Investigation of the environmental implications of using cerium oxide nano-additives in gasoline engines fueled with gasoline-oxyhydrogen." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 46, no. 1 (2024): 75-94. (SCIE and SCOPUS indexed, IF-2.5, Q2) |
| 8 | Dr.S.Jenoris Muthiya | Journal | Srivatsan, B., S. Naveen Venkatesh, S. Aravinth, V. Sugumaran, Joshuva Arockia Dhanraj, Jenoris Muthiya Solomon, and R. Muthu Vaidhyanathan. "Fault diagnosis of air compressors using transfer learning: A comparative study of pre-trained networks and hyperparameter optimization." Journal of Low Frequency Noise, Vibration and Active Control (2024): 14613484241273652. (SCIE and SCOPUS indexed, IF-2.3, Q1) |
| 9 | Dr.S.Jenoris Muthiya | Journal | Praveen Kumar T, Buvaanesh R, Saimurugan M, Naresh G, Jenoris Muthiya S, Basavanakattimath M. Performance evaluation of deep learning approaches for fault diagnosis of rotational mechanical systems using vibration, sound, and acoustic emission signals. Journal of Low Frequency Noise, Vibration and Active Control. 2024;0(0). doi:10.1177/14613484241240927.(SCIE and SCOPUS indexed, IF-2.3, Q1) |
| 10 | Dr.S.Jenoris Muthiya | Journal | Lawrance, G., P. Sam Paul, D. S. Shylu, D. S. Ebenezer Jacob Dhas, C. Dineshkumar, P. D. Jeyakumar, Solomon Jenoris Muthiya, and Netsanet Ayele Getachew. "Effect of metallic substrate and rubber elastic materials over passive constrained layer damping on tool vibration during boring process." Journal of Low Frequency Noise, Vibration and Active Control (2024): 14613484241238933.(SCIE and SCOPUS indexed, IF-2.3, Q1) |
| 11 | Dr.S.Jenoris Muthiya | Journal | GS, Divya, Jenoris Muthiya Solomon, Mahesh BR, and Isaac Joshua Ramesh Lalvani J. "Comparative analysis of static and vibration characteristics of glass fiber reinforced epoxy mono composite leaf spring and conventional steel leaf spring." Journal of Low Frequency Noise, Vibration and Active Control (2024): 14613484241257077. (SCIE and SCOPUS indexed, IF-2.3, Q1) |
| 12 | Dr.S.Jenoris Muthiya | Journal | Subramanian, Mohankumar, Ümit Ağbulut, Senthilkumar Pachamuthu, Satish Sathanandam, Jenoris Muthiya Solomon, Beena Stanislaus Arputharaj, Vijayanandh Raja, Parvathy Rajendran, and Mohammad Asif. "Computational and experimental investigations on liquid-based battery thermal management systems for electric vehicle applications under various discharge rates with different flow speeds." Journal of Energy Storage 91 (2024): 111757.(SCIE and SCOPUS indexed, IF-9.4, Q1) |
| 13 | Dr Vijay Tambrallimath | Journal | Mahale, R.S., Vasanth, S., Sharath, P.C. et al. Effect of Ball to Powder Ratios on the Phase Transformation of Austenite and Ferrite During Ball Milling of SAF-2507 Super Duplex Stainless Steel Powders. J. Inst. Eng. India Ser. D (2024). (IF - 1.9, Q2) |
| 14 | Dr Vijay Tambrallimath | Journal | GS Kumar, R Keshavamurthy, M Siva Santosh, Siddavatam Narayana Reddy, Vijay Tambrallimath. A Comprehensive Study on Parametric Optimization of Plasma-Sprayed Cr2C3 Coatings on Al6061 Alloy. J. Inst. Eng. India Ser. D (2024). (IF - 1.9, Q2) |
| 15 | Dr. Santhosh K | Journal | Santhosh K, G.N. Kumar, Parashuram Bedar, A novel approach to enhance the combustion quality of C5 alcohol with 2-Ethylhexyl nitrate as a cetane enhancer in common rail direct ignition diesel engine, Journal of Cleaner Production. (IF - 11.1, Q1) |
| 16 | Dr. Santhosh K | Journal | Comparison and Feasibility Study of Hexanol/Diesel/ Pongamia Biodiesel Blend on Engine Characteristics of a Common Rail Direct Injection Diesel Engine, SAE Technical Paper, 2024. (IF - 0.7, Q3) |
| LIST OF PAPER PUBLICATIONS BY FACULTIES CAY M1 (2022-23) | |||
| Sl. No. | Faculty name | Journal/Book chapter | Details |
| 1 | Dr. H N Suresh | Journal | MS Basavanakattimath, N Madhusudan, HN Suresh, “Effect of Vibrations on Rotor Model Assembly Due to Modifications in Coupling Design”, Journal of Vibration Engineering & Technologies 11 (1), 119-127. https://doi.org/10.1007/s42417-022-00564-2 |
| 2 | Dr. Naveena B E | Journal | BE Naveena, R Keshavamurthy, SJ Muthiya, JA Dhanraj, “Effect of plasma sprayed flyash based composite coatings on corrosion resistance”, Heliyon 9 (4) , Vol. 9, No.4, 2023,e15552. https://doi.org/10.1016/j.heliyon.2023.e15552 |
| 3 | Dr. Jenoris Muthiya | Journal | R Manoj Samson, R Aravind, SJ Muthiya, J Arockia Dhanraj, “Microfriction Stir Welding of Aluminium Using ABB IRB 1410 Robot”, Advances in Materials Science and Engineering 2023. IEEE Transactions on Magnetics https://doi.org/10.1155/2023/8033881 |
| 4 | Dr. Jenoris Muthiya | Journal | S Raja, S Nandagopal, SJ Muthiya, RS Nakandhrakumar, J Bilu, A Umar, ... “Thermal Analysis of an Electric Motor in an Electric Vehicle”,SAE Technical Paper, Vol. 46, No.6, pp. 2493 - 2496 DOI:10.1109/TMAG.2010.2042043 |
| 5 | Dr. Jenoris Muthiya | Journal | BE Naveena, R Keshavamurthy, SJ Muthiya, JA Dhanraj, “Effect of plasma sprayed flyash based composite coatings on corrosion resistance”, Vol. 9, No. 4, 2023, e15552, Heliyon 9 (4). https://doi.org/10.1016/j.heliyon.2023.e15552 |
| 6 | Dr. Jenoris Muthiya | Conference Proceedings | CP Ramaian, N Vinayagam, JA Dhanraj, N Selvaraju, S Anaimuthu, “An explicit revelation on swarm robotics and its optimization techniques” AIP Conference Proceedings 2690 (1), ISET INTERNATIONAL CONFERENCE ON APPLIED SCIENCE & ENGINEERING (CASE 2021),28–29 October 2021,Chennai, India https://doi.org/10.1063/5.0119555 |
| 7 | Dr. Jenoris Muthiya | Conference Proceedings | N Vinayagam, CP Ramaian, JA Dhanraj, JM Solomon, S Anaimuthu, “A multilayer perceptron approach for condition monitoring of automobile suspension system through vibration signal”, AIP Conference Proceedings 2690 (1). https://doi.org/10.1063/5.0119562 |
| 8 | Dr. Jenoris Muthiya | Conference Proceedings | CP Ramaian, N Vinayagam, KC Ramanathan, JA Dhanraj, N Selvaraju, “A critical evaluation on design and development of smart dust sensor for mechatronics applications”, AIP Conference Proceedings 2690 (1), https://doi.org/10.1063/5.0119542 |
| 9 | Dr. Jenoris Muthiya | Book chapter | SJ Muthiya, S Anaimuthu, JA Dhanraj, N Selvaraju, G Manikanta, “Application of Internet of Things (IoT) in the Automotive Industry”, Integration of Mechanical and Manufacturing Engineering with IoT: A Digital |
| 10 | Dr. Jenoris Muthiya | International Conference | Raja, S., Nandagopal, S., Muthiya, S., R, S, "Thermal Analysis of an Electric Motor in an Electric Vehicle," SAE Technical Paper 2023-01-0532, 2023”, WCX SAE World Congress Experience, 11th April, 2023 https://doi.org/10.4271/2023-01-0532 |
| 11 | Dr. Jenoris Muthiya | International Conference | Mohankumar, S., D. Ganeshkumar, S. Sathish, G. Thenmozhi, S. Sivakumar, and S. Jenoris Muthiya. "A numerical investigation on phase change material based battery thermal management system." In AIP Conference Proceedings, vol. 2446, no. 1. AIP Publishing, 2022. https://doi.org/10.1063/5.0108201 |
| 12 | Dr. Jenoris Muthiya | International Conference | Mohankumar, S., S. Sathish, C. Naveenkumar, S. John Alexis, and S. Jenoris Muthiya. "Numerical investigation on backpressure developed in adsorbent chamber for emission reduction in diesel engine." In AIP Conference Proceedings, vol. 2446, no. 1. AIP Publishing, 2022. https://doi.org/10.1063/5.0108202 |
| 13 | Dr. Jenoris Muthiya | Journal | Kumar, Pankaj, Amit Kumar Jain, Prem Kumar Chaurasiya,, Jenoris Muthiya Solomon, Aravinth Sivakumar, Karthikeyan Velmurugan, and Johannex Fefeh Rushman. "Sustainable machining using eco-friendly cutting fluids: A review." Advances in Materials Science and Engineering 2022 (2022). https://doi.org/10.1155/2022/5284471 |
| 14 | Dr. Jenoris Muthiya | Journal | Mageshbabu, Devarajan, Ravishankar Sathyamurthy, S. Jenoris Muthiya, and P. Srihari Reddy. "Heat transfer and hydraulic characteristics of micro finned tube inserted with twisted tape inserts and hybrid nanofluid (CNT/Al2O3)." Advances in Materials and Processing Technologies 8, no. sup1 (2022): 166-177. https://doi.org/10.1080/2374068X.2021.1872245 |
| LIST OF PAPER PUBLICATIONS BY FACULTIES CAY M1 (2021-22) | |||
| Sl. No. | Faculty name | Journal/Book chapter | Details |
| 1 | Dr. Vijay T | Journal | R., M.K.H.; Benal, M.G.M.; G. S., P.K.,Tambrallimath, V.; H.R., G.; Khan, T.M.Y.; Rajhi, A.A.; Baig, M.A.A. “Influence of Short Glass Fibre Reinforcement on Mechanical Properties of 3D Printed ABS-Based Polymer Composites”. Polymers 2022, 14, 1182. https://doi.org/10.3390/polym14061182 |
| 2 | Dr. Jenoris Muthiya | Journal | Solomon Jenoris Muthiya, L Natrayan, S Kaliappan, Pravin P Patil, BE Naveena, Joshuva Arockia Dhanraj, Mohankumar Subramaniam, Prabhu Paramasivam, "Experimental Investigation to Utilize Adsorption and Absorption Technique to Reduce CO2 Emissions in Diesel Engine Exhaust Using Amine Solutions". https://doi.org/10.1155/2022/9621423 |
| 3 | Divya G S | Journal | B Suresha, GS Divya, G Hemanth, HM Somashekar, “Physico-mechanical properties of nano silica-filled epoxy-based mono and hybrid composites for structural applications”, Silicon 13 (7), 2021, 2319-2335 https://doi.org/10.1007/s12633-020-00812-8 |
| 4 | Divya G S | Journal | GS Divya, B Suresha, HM Somashekar, IM Jamadar, “Dynamic mechanical analysis and optimization of hybrid carbon-epoxy composites wear using Taguchi method”, Tribology in industry 43 (2), 2021, pp. 298-309. DOI: 10.24874/ti.931.07.20.11 |
| 5 | Kavya J T | Journal | Keshavamurthy, R., Manjoth, S., Pradeep Kumar, G.S. and Kavya, J.T. (2021) ‘Parametric effect on machining characteristics of laser machined Al7075–TiB2 in-situ composite’, Int. J. Computational Materials Science and Surface Engineering, Vol. 10, Nos. 3/4, pp.165–183. https://www.inderscienceonline.com/doi/pdf/10.1504/IJCMSSE.2021.121374 |
| 6 | Dr. Jenoris Muthiya | Journal | Agrawal, Yogesh, J. L. Bhagoria, Atul Gautam, Prem Kumar Chaurasiya, Joshuva Arockia Dhanraj, Jenoris Muthiya Solomon, and Srikanth Salyan. "Experimental evaluation of hydrothermal performance of solar air heater with discrete roughened plate." Applied Thermal Engineering 211 (2022): 118379. https://www.sciencedirect.com/science/article/pii/S1359431122003362 |
| 7 | Dr. Jenoris Muthiya | Journal | Kumar, H. S., K. R. Jagadeesh, R. B. Anand, T. Rangaswamy, Srikanth Salyan, Jenoris Muthiya Solomon, Joshuva Arockia Dhanraj, and Joshua Stephen Chellakumar Isaac Joshua Ramesh Lalvani. "The Impact of Critical Flutter Velocity in Composite Wind Turbine Blade with Prebend Condition." Mathematical Problems in Engineering 2022 (2022). https://www.hindawi.com/journals/mpe/2022/2050821/ |
| 8 | Dr. Jenoris Muthiya | Journal | Solomon Jenoris Muthiya, L Natrayan, S Kaliappan, Pravin P Patil, BE Naveena, Joshuva Arockia Dhanraj, Mohankumar Subramaniam, Prabhu Paramasivam, "Experimental Investigation to Utilize Adsorption and Absorption Technique to Reduce CO2 Emissions in Diesel Engine Exhaust Using Amine Solutions". https://doi.org/10.1155/2022/9621423 |
| 9 | Dr. Jenoris Muthiya | Journal | Subramanian, Mohankumar, Sathish Sathanandam, Jenoris Muthiya Solomon, Ravishankar Sathyamurthy, Joshuva Arockia Dhanraj, B. Kalisadan, Amrit Kumar Thakur, and Zafar Said. "Numerical and Experimental Investigation on Enhancing Thermal Conductivity of Paraffin Wax with Expanded Graphene in Battery Thermal Management System." International Journal of Environmental Research 16, no. 1 (2022): 1-14. https://link.springer.com/article/10.1007/s41742-021-00389-z |
| 10 | Dr. Jenoris Muthiya | Journal | Subramanian, Mohankumar, Anh Tuan Hoang, B. Kalidasan, Sandro Nižetić, Jenoris Muthiya Solomon, Dhinesh Balasubramanian, C. Subramaniyan, G. Thenmozhi, Hameed Metghalchi, and Xuan Phuong Nguyen. "A technical review on composite phase change material based secondary assisted battery thermal management system for electric vehicles." Journal of Cleaner Production 322 (2021): 129079. https://www.sciencedirect.com/science/article/pii/S2214785322015668 |
| 11 | Dr. Jenoris Muthiya | Book chapter | Solomon, Jenoris Muthiya, Mohankumar Subramaniam, C. Dinesh Kumar, Joshuva Arockia Dhanraj, Nadanakumar Vinayagam, Christu Paul Ramaian, and A. V. Sivabalan. "Experimental Assessment on Performance and Emission Characteristics of Calophyllum inophyllum (Tamanu) Seed Oil in Direct Injection Diesel Engines." Technology Innovation in Mechanical Engineering: Select Proceedings of TIME 2021: 283. https://link.springer.com/chapter/10.1007/978-981-16-7909-4_25 |
| 12 | Dr. Jenoris Muthiya | Book chapter | Solomon, Jenoris Muthiya, Mohankumar Subramaniam, Joshuva Arockia Dhanraj, Nadanakumar Vinayagam, Christu Paul Ramaian, Nandakumar Seelvaraju, and A. Bachmann. "A Low-Cost Selective Catalytic Reduction System for Diesel Engine Oxides of Nitrogen Control." In Technology Innovation in Mechanical Engineering, pp. 251-259. Springer, Singapore, 2022. https://link.springer.com/chapter/10.1007/978-981-16-7909-4_22 |
| 13 | Dr. Jenoris Muthiya | Book chapter | Subramaniam, Mohankumar, Jenoris Muthiya Solomon, Joshuva Arockia Dhanraj, Christu Paul Ramaian, Nadanakumar Vinayagam, Nandakumar Selvaraju, and A. Ramana Johannes Bachmann. "Performance Enhancement of Jatropha Methyl Ester by Utilizing Oxygen Enrichment in Diesel Engine." In Technology Innovation in Mechanical Engineering, pp. 261-271. Springer, Singapore, 2022. https://link.springer.com/chapter/10.1007/978-981-16-7909-4_23 |
| 14 | Dr. Jenoris Muthiya | Book chapter | Subramaniam, Mohankumar, Jenoris Muthiya Solomon, Nadanakumar Vinayagam, Nandakumar Selvaraju, Joshuva Arockia Dhanraj, Christu Paul Ramaian, and A. V. Sivabalan. "Experimental Study on Utilization of Karanja Bio Oil in Diesel Engines and Performance Enhancement by Oxygenated Additives." In Technology Innovation in Mechanical Engineering, pp. 273-282. Springer, Singapore, 2022. https://link.springer.com/chapter/10.1007/978-981-16-7909-4_24 |
| 15 | Dr. Jenoris Muthiya | Book chapter | Arockia Dhanraj, Joshuva, Jenoris Muthiya Solomon, Mohankumar Subramaniam, Meenakshi Prabhakar, Christu Paul Ramaian, Nandakumar Selvaraju, and Nadanakumar Vinayagam. "Misfire Prediction on Spark Ignition Four-Stroke Engine Through Statistical Features Using Rough Set Theory Classifier." In Technology Innovation in Mechanical Engineering, pp. 129-138. Springer, Singapore, 2022. https://link.springer.com/chapter/10.1007/978-981-16-7909-4_12 |
| 16 | Dr. Jenoris Muthiya | Book chapter | Arockia Dhanraj, Joshuva, Meenakshi Prabhakar, Christu Paul Ramaian, Mohankumar Subramaniam, Jenoris Muthiya Solomon, and Nadanakumar Vinayagam. "Increasing the Wind Energy Production by Identifying the State of Wind Turbine Blade." In Technology Innovation in Mechanical Engineering, pp. 139-148. Springer, Singapore, 2022. https://link.springer.com/chapter/10.1007/978-981-16-7909-4_13 |
| 17 | Dr. Jenoris Muthiya | Book chapter | Arockia Dhanraj, Joshuva, Christu Paul Ramaian, Jenoris Muthiya Solomon, Nandakumar Selvaraju, Mohankumar Subramaniam, and Meenakshi Prabhakar. "Development of a Regression Model Through Variational Mode Decomposition for the Remaining Useful Life Assessment of a Gear Box." In Technology Innovation in Mechanical Engineering, pp. 209-222. Springer, Singapore, 2022. https://link.springer.com/chapter/10.1007/978-981-16-7909-4_19 |
| 18 | Dr. Ravikumar K N | Journal | Ravikumar, K. N., Yadav, A., Kumar, H., Gangadharan, K. V., & Narasimhadhan, A. V. (2021). Gearbox fault diagnosis based on Multi-Scale deep residual learning and stacked LSTM model. Measurement, 186, 110099. https://doi.org/10.1016/j.measurement.2021.110099 |
| 19 | Dr. Ravikumar K N | Journal | Ravikumar, K. N., Madhusudana, C. K., Kumar, H., & Gangadharan, K. V. (2022). Classification of gear faults in internal combustion (IC) engine gearbox using discrete wavelet transform features and K star algorithm. Engineering Science and Technology, an International Journal, 30, 101048. https://doi.org/10.1016/j.jestch.2021.08.005 |
| 20 | Dr. Ravikumar K N | Journal | Ravikumar, K. N., Aralikatti, S. S., Kumar, H., Kumar, G. N., & Gangadharan, K. V. (2022). Fault diagnosis of antifriction bearing in internal combustion engine gearbox using data mining techniques. International Journal of System Assurance Engineering and Management, 13(3), 1121-1134. https://doi.org/10.1007/s13198-021-01407-1 |
| 21 | Dr. Praveen Kumar M V | Journal | Authors: Manjunath T S, Seenappa, Veeresh Kumar G B, Praveen Kumar M V, Rudresh M Title: ‘Study of Mechanical Properties of SiC and Gr Reinforced Al7075 Powder Metallurgy Composites and Analysis of Results using ANOVA’ Journal: The Institution of Engineers (India) 2021. J. Inst. Eng. India Ser. D, Published online on: 27 January 2022. https://doi.org/10.1007/s40033-021-00319-5 |
| 22 | Dr. Praveen Kumar M V | Journal | Manjunath T S, Seenappa, Praveen Kumar M V, Rudresh M, ‘Study of wear properties of Al7075-SiC-Gr omposites using Taguchi and ANOVA methods’NJournal: Inderscience Enterprises Ltd. Int. J. Computational Materials Science and Surface Engineering, Vol. 11, No. 2, 2022 https://www.inderscience.com/offer.php?id=127970 |
| 23 | Dr. Jenoris Muthiya S | International Conference | S. Mohankumar; D. Ganeshkumar; S. Sathish; G. Thenmozhi; S. Sivakumar; S. Jenoris Muthiya, “A numerical investigation on phase change material based battery thermal management system”, International Conference On Materials Research In Science And Engineering, 23–25 July 2021,Coimbatore, India |
| 24 | Dr. Jenoris Muthiya S | International Conference | Nadanakumar Vinayagam; Christu Paul Ramaian; Joshuva Arockia Dhanraj; Jenoris Muthiya Solomon; Shridhar Anaimuthu; Nandakumar Selvaraju “A multilayer perceptron approach for condition monitoring of automobile suspension system through vibration signal”, ISET International Conference On Applied Science & Engineering (CASE 2021), 28–29 October 2021,Chennai, India |
| LIST OF PAPER PUBLICATIONS BY FACULTIES CAY M1 (2020-21) | |||
| Sl. No. | Faculty name | Journal/Book chapter | Details |
| 1 | Dr. H N Suresh | Journal | Murgayya S B, H N Suresh, Madhusudhan N, Sarvanabavan D, “Reliability Analysis of Machine Tool Spindle – Bearing System using XLrotor”, Journal Life Cycle Reliability and Safety Engineering, Scopus Indexed,2020Springer Nature SwitzerlandPte. Ltd https://doi.org/10.1007/s41872-020-00157-6 |
| 2 | Dr. Nandakumar M B | Journal | MB Nandakumar, GN Lokesh, H Natu, BR Mahesh, MK Venkatesh, "Laser Surface Texturing of Eutectic Al-Si Alloy", IOP Conference Series: Materials Science and Engineering 1013 (1), 012012 doi:10.1088/1757-899X/1013/1/012012 |
| 3 | Mahesh B R | Journal | BR Mahesh, J Satheesh Comparative analysis of forming limit diagram of Al 5052-H32 and Al 6063 T5 International Journal of Computational Materials Science and Engineering -2021 2150013 |
| 4 | Dr. Naveena B E | Journal | R Keshavamurthy, Naveena B E, Ramesh T and Shashikumara N K. “Optimization of Process Parameters for Plasma Sprayed Lanthanum Zirconate TBCs on Nickel Based Superalloy”, Advances in Science and Technology, vol. 106, Trans Tech Publications, Ltd., May 2021, pp. 90–96, doi:10.4028/www.scientific.net/ast.106.90. |
| 5 | Dr. Naveena B E | Journal | R Keshavamurthy, B E Naveena, C. S. Ramesh & M. R. Haseebuddin. “Evaluation of Slurry Erosive Wear Performance of Plasma Sprayed Flyash-TiO2 Composite Coatings", J Bio Tribo Corros 7, 92 (2021). https://doi.org/10.1007/s40735-021-00525-4. |
| 6 | Dr. Naveena B E | Book Chapter | R. Keshavamurthy, Naveena B E, Vijay T, Prabhakar Kuppahalli, “Optimization of Deposition Parameters in Plasma Spray Coatings”, Modeling and Optimization in Manufacturing, © 2021 WILEY‐VCH GmbH, UK, ISBN-10: 3527346945, ISBN-13: 978-3527346943. https://doi.org/10.1002/9783527825233.ch8. |
| 7 | Divya G S | Journal | GS Divya, B Suresha, “Impact of nano-silicon dioxide on mechanical properties of carbon fabric reinforced epoxy composites, Materials Today: Proceedings 46, 8999-9003 https://doi.org/10.1016/j.matpr.2021.05.377 |
| 8 | Dr. Murgayya S B | Journal | Murgayya S B, H N Suresh, Madhusudhan N, Sarvanabavan D, “Reliability Analysis of Machine Tool Spindle – Bearing System using XLrotor” Journal Life Cycle Reliability and Safety Engineering, Scopus Indexed,2020Springer Nature SwitzerlandPte. Ltd https://doi.org/10.1007/s41872-020-00157-6 |
| 9 | Dr. Vijay T | Journal | Vijay Tambrallimath, R. Keshavamurthy, Saravanabavan D, Praveennath G Koppad and D Sethuram. “Mechanical Characterization of PC-ABS Reinforced with CNT Nanocomposites developed by Fused Deposition Modelling”. IOP Conf. Series: Journal of Physics: Conf. Series 1455 (2020) 012003 DOI 10.1088/1742-6596/1455/1/012003 |
| 10 | Dr. Vijay T | Journal | Rohan Sahay, Raghuveer Nayak, Niyaz Naik, VijayTambrallimath “Influence of silicon carbide reinforcement on mechanical behavior of 3D printed polymer composites”, Materials Today Proceedings, 2021. https://doi.org/10.1016/j.matpr.2020.12.787 |
| 11 | Dr. Vijay T | Journal | G.S. Pradeep Kumar; R. Keshavamurthy; M. Prabhu Akhil; K. Kiran; Mervin J. Thomas; Vijay Tambrallimath; Gurumoorthy S. Hebbar. “Friction and wear behaviour of HVOF sprayed Cr2O3-TiO2 coatings on aluminium alloy”, International Journal of Materials Engineering Innovation. 2021 Vol.12 No.1, pp 1-17. https://doi.org/10.1504/IJMATEI.2021.113213 |
| 12 | Dr. Vijay T | Journal | Vijay Tambrallimath, Keshavamurthy R, Abhinandan Badari, Lohith Ramesh, Gagan Raj, “Emergence of Additive Manufacturing in global scale during the crisis of 2019-nCoV (novel corona virus)”. Materials Today Proceedings. 2021. https://doi.org/10.1016/j.matpr.2020.12.999 |
| 13 | Dr. Vijay T | Book Chapter | R. Keshavamurthy, C.S. Ramesh, G.S. Pradeep Kumar and Vijay Tambrallimath. Experimental investigation of tribocorrosion. In book: Tribocorrosion: Fundamentals, Methods, and Materials (2021). https://doi.org/10.1016/B978-0-12-818916-0.00001-8. pp 17-42 |
| 14 | Dr. Vijay T | Book Chapter | Keshavamurthy Ramaiah, Naveena Bettahalli Eswaregowda, Vijay Tambrallimath, Prabhakar Kuppahalli. Optimization of Deposition Parameters in Plasma Spray Coatings. In book : Modelling and Optimization in Manufacturing: Toward Greener Production by Integrating Computer Simulation. Editor: Catalin I. PruncuJun. pp 217- 235 Jiang https://doi.org/10.1002/9783527825233.ch8 (April 2021). |
| 15 | Dr. Vijay T | Book Chapter | R. Keshavamurthy, Vijay Tambrallimath, G. Ugrasen, D. P. Girish. Sustainable Product development by Fused Deposition Modelling Process. Editors: H. K. Dave and J. P. Davim (eds.), Fused Deposition Modeling Based 3D Printing, Materials Forming, Machining and Tribology, https://doi.org/10.1007/978-3-030-68024-4_12 |
| 16 | Dr .Vijay T | Book Chapter | Vijay Tambrallimath, R Keshavamurthy, Arun Patil, H. Adarsha, “Mechanical and Tribological Characteristics of Polymer Composites Developed by Fused Deposition Modelling”, Fused Deposition Modeling Based 3D Printing, Materials Forming, Machining and Tribology, https://doi.org/10.1007/978-3-030-68024-4_8 |
| 17 | Dr. S.Jenoris Muthiya | Journal | Vinayagam, Nadana Kumar, Anh Tuan Hoang, Jenoris Muthiya Solomon, Mohankumar Subramaniam, Dhinesh Balasubramanian, Ahmed I. EL-Seesy, and Xuan Phuong Nguyen. "Smart control strategy for effective hydrocarbon and carbon monoxide emission reduction on a conventional diesel engine using the pooled impact of pre-and post-combustion techniques." Journal of Cleaner Production 306 (2021): 127310. https://doi.org/10.1016/j.jclepro.2021.127310 |
| 18 | Prof. Reena | Journal | Reena Y.A., Dr. S.A.Vasantha Kumara “Review on Dynamics of Technical Manpower Supply”” , Journal of Advanced Research in Industrial Engineering, HBRP Publication, Volume 2, Issue 2 DOI: http://doi.org/10.5281/zenodo.3974386 |
| 19 | Dr. H N Suresh | International Conference | Murgayya S.B, H.N.Suresh, Madhusudhan N, Sarvanabavan B “Vibration Signature Analysis of Blower - Coupling Assembly using Xlrotor”, International Conference on Advances in Mechanical Engineering sciences and Management (ICAMESM-2020), 7th to 9th of December 2020, DSCE, Bangalore,India |
| 20 | Dr. Nandakumar M B | International Conference | Nandakumar M B, Joseph Raj Chandrakantha, G N Lokesh, Mahesh B R, “Effect of controlled cooling of air cooled engines”, International Conference on Advances in Mechanical Engineering sciences and Management (ICAMESM-2020), 7th to 9th of December 2020, DSCE, Bangalore, India |
| 21 | Mahesh B R | International Conference | Nandakumar M B, Joseph Raj Chandrakantha, G N Lokesh, Mahesh B R, “Effect of controlled cooling of air cooled engines”, International Conference on Advances in Mechanical Engineering sciences and Management (ICAMESM-2020), 7th to 9th of December 2020, DSCE, Bangalore, India. |
| 22 | Divya G S | International Conference | Nihal A, Srushti D N, Divya G S, “Design and Analysis of Chassis using Autodesk Fusion 360”, International Conference on Advances in Mechanical Engineering sciences and Management (ICAMESM-2020), 7th to 9th of December 2020, DSCE, Bangalore, India. |
| 23 | Dr. Murgayya SB | International Conference | Murgayya S.B, H.N.Suresh, Madhusudhan N, Sarvanabavan B “Vibration Signature Analysis of Blower - Coupling Assembly using Xlrotor”, International Conference on Advances in Mechanical Engineering Sciences & Management (ICAMESM-2020) held from 7th to 9th of December 2020, DSCE, Bangalore, India. |
| 24 | Dr. Naveena B E | International Conference | Sriram C, Naveena B E , Sudhanva A Katti , Daksha M R, “Carbon Fibre Reinforced Plastics in the Automotive Industry: A Review”, International Conference on Advances in Mechanical Engineering sciences and Management (ICAMESM-2020), 7th to 9th of December 2020, DSCE, Bangalore |
| 25 | Dr. Vijay T | International Conference | Vijay Tambrallimath, Keshavamurthy R, Abhinandan Badari, Lohith Ramesh, Gagan Raj, “Emergence of Additive Manufacturing in global scale during the crisis of 2019-nCoV (novel corona virus)”, Mater Today Proc. 2021; 45: 6813–6817. doi: 10.1016/j.matpr.2020.12.999. Epub 2021 Jan 20. |
| LIST OF PAPER PUBLICATIONS BY FACULTIES CAY M1 (2019-20) | |||
| Sl. No. | Faculty name | Journal/Book chapter | Details |
| 1 | Divya G S | Journal | G.S. Divya, B. Suresha, H.M. Somashekar, I.M. Jamadar, “Dynamic Mechanical Analysis and Optimization of Hybrid Carbon-Epoxy Composites Wear using Taguchi Method”, Tribology in Industry, 2020, pp 1-12 |
| 2 | Divya G S | Journal | B Suresha, G S Divya, G Hemanth, H M Somashekar, “Physico-Mechanical properties of Nano-Silica filled Epoxy-based Mano and Hybrid Composites for Structural Applications”, Silicon, 2020, pp 1-17 |
| 3 | Kavya J T | Journal | PrabhakarKuppahalli , R. Keshavamurthy , P. Sriram3 , J.T Kavya, " Microstructural and Mechanical behaviour of Nickel Aluminum Bronze alloys" IOP Conf. Series: Materials Science and Engineering 577 (2019) 012044 |
| 4 | Kavya J T | Journal | J.T Kavya, R.Keshavamurthy, G.S Pradeep kumar , Ugrasen.G , Manjoth S, "Prediction of machining characteristics of Abrasive Water Jet Machined Al7075-TiB2 In-situ composite ", Materials Today: Proceedings 24 (2020) 851–858. |
| 5 | Mahesh B R | Journal | BR Mahesh, J Satheesh - Numerical Analysis and Prediction of FLD For Al Alloy-6063 Fatigue, Durability, and Fracture Mechanics proceedings -2019 pp 577-587 |
| Mahesh B R | Journal | BR Mahesh, J Satheesh Experimental and numerical analysis of forming limit diagram of Al-5052 using Nakazima test AIP Conference Proceedings 2316 (1), 030007 | |
| 6 | Dr Vijay T | Journal | Vijay Tambrallimath, R Keshavamurthy, Saravanbavan D, Pradeepkumar G S and Harish Kumar M. Synthesis and Characterization of Graphene Filled PC-ABS Filament for FDM Applications. Advances in Polymer Composites: Mechanics, Characterization and Applications AIP Conf. Proc. 2057, 020039-1–020039-8; 2019 |
| 7 | Dr Vijay T | Journal | Vijay Tambrallimath, R Keshavamurthy, Saravanabavan D and Praveennath G Koppad. Thermal Behaviour of PC-ABS based Graphene filled Polymer Nano Composite Synthesized by FDM Process. Composites Communications 15 (2019) 129–134. |
| 8 | Dr Vijay T | Book Chapter | RamaiahKeshavamurthy, Tambrallimath Vijay, DavanSaravanabavan. Development of Polymer Composites by Additive Manufacturing Process. In book: Reference Module in Materials Science and Materials Engineering. Doi: 10.1016/B978-0-12-803581-8.11885-5 |
| 9 | Dr Vijay T | Book Chapter | R.Keshavamurthy, Vijay Tambrallimath, Praveen G Koppad and Kanakenahalli V. S. Murthy. Emerging Technologies for In-Situ MMC Production. In book: Reference Module in Materials Science and Materials Engineering. https://doi.org/10.1016/B978-0-12-803581-8.11908-3 |
| 10 | Dr Vijay T | Journal | Shijo Thomas, R Keshavamurthy, Pradeep Kumar G S, Vijay Tambrallimath and Prasanna G D. An Improved Compocasting Technique for Uniformly Dispersed Multi-walled Carbon Nanotube in AA2219 Alloy Melt. FME Transactions (2020) 48, 581-587. doi: 10.5937/fme2003581T |
| 11 | Dr Vijay T | Journal | Keshavamurthy R, Vijay Tambrallimath, Abhinandan B, Anand Krishna, Shabber Ahmed M. Friction and wear behaviour of copper reinforced acrylonitrile butadiene styrene based polymer composite developed by fused deposition modelling process. FME Transactions (2020) 48, 543-550. Doi: 10.5937/fme2003543K |
| 12 | Naveena B E | Journal | R Keshavamurthy, B E Naveena, AbrarAhamed, N Sekhar and Dada Peer, “Corrosion Characteristics of Plasma Sprayed Flyash-SiC and Flyash- Al2O3 Composite Coatings on the Al-6061 Alloy”, Materials Research Express, 6 (2019) 0865i4, IOPScience. DOI: https://doi.org/ 10.1088/2053-1591/ab28e1. |
| 13 | Naveena B E | Journal | Naveena, B.E., Keshavamurthy, R. and Sekhar, N. “Comparative study on effects of slurry erosive parameters on plasma sprayed flyash- Al2O3 and flyash-SiC composite coatings on Al6061 alloy”, Int. J. Computational Materials Science and Surface Engineering, (2019) Vol. 8, No. 1, pp.57–75. DOI: 10.1504/IJCMSSE.2019.101657. |
| 14 | Dr.H.N.Suresh | Journal | Murgayya S B, H N Suresh, Madhusudhan N, Sarvanabavan B, Optimization of High Speed Rotor-Bearings Systemto Assess the Reliability using XLrotor” International Journal of Performability Engineering ›› 2020, vol. 16, no. 7, July 2020, pp. 991-998Scopus Indexed, RAMS Engineering © 2020 Totem Publisher DOI: 10.23940/ijpe.20.07.p1.991998 available at www.ijpe-online.com |
| 15 | Dr.H.N.Suresh | Book Chapter | H.N Suresh, Madhusudan N, Saravanbavan B, Murgayya SB, “Analysis of Jeffcott Rotor & Rotor with Diskusing XLRotor”, Title Series “Assets Analytics- Performance and Safety Management” Book Series“Strategic System Assurance and Business Analytics” ebook ISBN978-981-15-3647-2, Series ISSN 2522-5162,Springer Nature Singapore PteLtd.,Scopus Indexed, DOI:10.1007/978-981-15-3647-2(2020) available at https://www.springer.com/gp/book/9789811536465. |
| 16 | Dr. Murgayya SB | Journal | Murgayya S B, H N Suresh, Madhusudhan N, Sarvanabavan B, Optimization of High Speed Rotor-Bearings Systemto Assess the Reliability using XLrotor” International Journal of Performability Engineering ›› 2020, vol. 16, no. 7, July 2020, pp. 991-998Scopus Indexed, RAMS Engineering © 2020 Totem Publisher DOI: 10.23940/ijpe.20.07.p1.991998 available at www.ijpe-online.com |
| 17 | Dr. Murgayya SB | Book Chapter | H.N Suresh, Madhusudan N, Saravanbavan B, Murgayya SB, “Analysis of Jeffcott Rotor & Rotor with Diskusing XLRotor”, Title Series “Assets Analytics- Performance and Safety Management” Book Series“Strategic System Assurance and Business Analytics” ebook ISBN978-981-15-3647-2, Series ISSN 2522-5162,Springer Nature Singapore PteLtd.,Scopus Indexed, DOI:10.1007/978-981-15-3647-2(2020) available at https://www.springer.com/gp/book/9789811536465. |
| LIST OF PAPER PUBLICATIONS BY FACULTIES CAY M1 (2018-19) | |||
| Sl. No. | Faculty name | Journal/Book chapter | Details |
| 1 | Divya G S | Journal | Divya G S, B. Suresha, “Role of Metallic Nanofillers on Mechanical and Tribological Behavior of Carbon Fabric Reinforced Epoxy Composites” Materials Sciences and Applications, Vol 9, pp 740-750, 2018 |
| 2 | Kavya J T | Journal | G S Pradeepkumar, R. Keshavamurthy, Prachikumari, S.Manjoth and J T Kavya , " Electrochemical behavior of cast and forged aluminum based in-situ metal matrix composites". |
| 3 | Dr Vijay T | Journal | Pradeep Kumar G S, R. Keshavamurthy, Vijay Tambrallimath, Riya Biswas and YogeshSahebraoAndhale. Mechanical Properties of Al7075-SiC- TiO 2 Hybrid Metal Matrix Composite. Advanced Manufacturing and Material Science, Springer International Publishing. Electronic ISBN: 978-3-319-76276-0, 2018, 301-307 |
| 4 | Dr Vijay T | Journal | Vijay Tambrallimath, Keshavamurthy R and Saravanabavan D. Thermal Conductivity of Copper filled polymer composites synthesized by FDM process. International Journal of Mechanical and Production Engineering Research and Development. ISSN (P): 2249-6890, Vol 8, Special Issue 8, August 2018, 292-296. |
| 5 | Dr Vijay T | Book Chpater | R.Keshavamurthy, Vijay Tambrallimath, Prabhakar.K. andSekhar N. Additive Manufacturing Processes and their Applications for Green Technology. Handbook of Research on Green Engineering Techniques for Modern Manufacturing. Editors: Dr.PauloDavim, Dr.S.T.Kumaran, Prof.Taw Jo Ko, Dr.S.Arvind Raj, M. Uthayakumar, IGI Global, USA, November 2018. Doi: 10.4018/978-1-5225-5445-5. 2019 |
| 6 | Naveena B E | Journal | Naveena B.E, R. Keshavamurthy and N. Sekhar, “Dry Sliding Wear Behaviour of Plasma Sprayed Flyash-Al2O3 and Flyash-SiC Coatings on the Al6061 Aluminum Alloy”, Silicon, © Springer Nature B.V. (2018). DOI: https://doi.org/10.1007/s12633-018-9978-x, |
| 7 | Naveena B E | Book Chpater | R. Keshavamurthy, Naveena B.E and N. Sekhar, “Thermal Spray Coatings for Erosion-Corrosion Protection”, IGI Global book series, Advances in Chemical and Materials Engineering (ACME) (ISSN: 2327-5448; eISSN: 2327-5456), Ideal Group, Inc. US. Copyright © 2018 by IGI Global. DOI: 10.4018/978-1-5225-4194-3.ch010. |
| 8 | Nandakumar M B | Journal | MB Nandakumar, KG Sudhakar, H Natu, GB Jagadish, "Experimental investigation of the effect of laser texturing on the used IC engine piston skirt", Materials Today: Proceedings 5 (1), 2773-2780 |
| 9 | Nandakumar M B | Journal | MB Nandakumar, KG Sudhakar, H Natu, GB Jagadish, Experimental investigation of slurry erosion characteristics of laser treated nickel aluminum bronze, Materials Today: Proceedings 5 (1), 2641-2649 |
| 10 | Dr.H.N.Suresh | Journal | Murgayya S B, H N Suresh, Madhusudhan N, Sarvanabavan B, “Reliability Based Maintenance Model to Assess the Condition of Rotor using XLrotor” International Journal of Performability Engineering ›› 2019, Vol. 15 ›› Issue (8): 2019-2030 Scopus Indexed,RAMS Engineering © 2019 Totem Publisher DOI: 10.23940/ijpe.19.08.p1.20192030availableat http://www.ijpe-online.com/EN/Y2019/V15/I8/2019 |
| 11 | Dr.H.N.Suresh | Book Chpater | H.N.Suresh, Madhusudan.N, Sarvanabavan B, Murgayya SB, “A Study on Reliability of Rotors usingXLrotor” Series Title ”Springer Series in Reliability Engineering” Book Title“Advances in RAMSEngineering”, ISBN978-3-030-36518-9, Series ISSN 1614-7839, Springer Nature Switzerland AGPublication Pte. Ltd., Scopus Indexed DOI: 10.1007/978-3-030-36518-9 (2019) available at https://link.springer.com/chapter/10.1007/978-3-030-36518-9_8 |
| 12 | Dr.Murgayya SB | Journal | Murgayya S B, H N Suresh, Madhusudhan N, Sarvanabavan B, “Reliability Based Maintenance Model to Assess the Condition of Rotor using XLrotor” International Journal of Performability Engineering ›› 2019, Vol. 15 ›› Issue (8): 2019-2030 Scopus Indexed,RAMS Engineering © 2019 Totem Publisher DOI: 10.23940/ijpe.19.08.p1.20192030availableat http://www.ijpe-online.com/EN/Y2019/V15/I8/2019 |
| 13 | Dr.Murgayya SB | Book Chpater | H.N.Suresh, Madhusudan.N, Sarvanabavan B, Murgayya SB, “A Study on Reliability of Rotors usingXLrotor” Series Title ”Springer Series in Reliability Engineering” Book Title“Advances in RAMSEngineering”, ISBN978-3-030-36518-9, Series ISSN 1614-7839, Springer Nature Switzerland AGPublication Pte. Ltd., Scopus Indexed DOI: 10.1007/978-3-030-36518-9 (2019) available at https://link.springer.com/chapter/10.1007/978-3-030-36518-9_8 |
